Our company provides dry inlay, wet inlay, and different kinds of sizes paper adhesive labels.
Adhesive paper tag has back gum (making of wet inlay), paper RFID tag doesn’t have back gum (making of dry inlay).
We own the HF/UHF antenna design technology, full set of automatic label production line, and we can design UHF antenna for our customers if paid, and use paper/PET/PVC/ABS/adhesive to make roll RFID tags or single RFID tags According to customer requirements.
Adhesive paper tag has back gum (making of wet inlay), paper RFID tag doesn’t have back gum (making of dry inlay).
We own the HF/UHF antenna design technology, full set of automatic label production line, and we can design UHF antenna for our customers if paid, and use paper/PET/PVC/ABS/adhesive to make roll RFID tags or single RFID tags According to customer requirements.
Specification:
| Chip Model: | All chips are available |
| Frequency: | 13.56MHz |
| Memory: | depend on the chips |
| Protocol: | ISO14443A |
| Base material: | PET |
| Antenna material: | Aluminium foil |
| Antenna size: | 26*12mm, 22mm Dia, 32*32mm, 37*22mm, 45*45mm, 76*45mm, or as request |
| Working temperature: | -25°C ~ +60°C |
| Store Temperature: | -40°Cto +70°C |
| Read/Write Endurance: | >100,000 time |
| Reading Range: | 3-10cm |
| Certificates: | ISO9001:2000, SGS |
Chip Option
|
ISO14443A |
MIFARE Classic® 1K, MIFARE Classic® 4K |
| MIFARE® Mini | |
| MIFARE Ultralight®, MIFARE Ultralight® EV1, MIFARE Ultralight® C | |
| NTAG213 / NTAG215 / NTAG216 | |
| MIFARE ® DESFire® EV1 (2K/4K/8K) | |
| MIFARE® DESFire® EV2 (2K/4K/8K) | |
| MIFARE Plus® (2K/4K) | |
| Topaz 512 | |
|
ISO15693 |
ICODE SLIX, ICODE SLI-S |
|
EPC-G2 |
Alien H3, Monza 4D, 4E, 4QT, Monza R6, etc |
Product image of square 13.56Mhz HF RFID Dry Inlay
RFID Wet Inlays are described as “wet” due to their adhesive backing, so they are essentially industrial RFID stickers. Passive RFID Tags are comprised of two parts: an integrated circuit for storing and processing information and an antenna for receiving and transmitting the signal. They have no internal power supply. RFID Wet Inlays are best for applications where a low-cost “peel-and-stick” tag is needed. Any RFID Wet Inlay can also be converted into a paper or synthetic face label.
