Product Overview

The DO RFID Reader dual frequency reader operates at both 125KHz and 13.56MHz, supporting ID, HID, and IC card formats through a single compact device with Wiegand 26-34 output. This reader is designed for system integrators and access control project contractors who need a single reader capable of handling multiple card technologies across different deployment sites. By combining two frequency bands in one unit, it eliminates the need for separate readers when migrating from legacy 125KHz ID systems to newer 13.56MHz IC-based credentials, reducing hardware costs and simplifying installation.

Wholesalers and distributors serving the security access control sector choose this reader because it reduces inventory complexity while covering both legacy and modern card formats. For industrial facility upgrades where phased migration from ID to IC cards is planned, this reader allows sites to operate both systems simultaneously during transition periods without requiring hardware replacement.

Product Advantages

This dual frequency reader solves the practical problem of system migration and credential compatibility. When a commercial building or industrial facility holds both 125KHz ID cardholders and newer 13.56MHz IC cardholders, maintaining separate readers increases procurement and maintenance costs. This reader reads both frequencies through one unit, allowing facility managers to deploy a single reader model across all access points regardless of the credential type in use.

For system integrators, the Wiegand 26-34 output ensures direct compatibility with existing access control panels and controllers. No additional protocol conversion or interface hardware is required. The 7cm read range provides reliable read performance at typical door reader mounting distances, suitable for walk-through and lobby access control points in office buildings, manufacturing plants, warehouse facilities, and commercial complexes.

Buyers include:

• Access control system integrators deploying multi-site projects
• Security equipment wholesalers stocking compatible readers for resale
• Facility management teams upgrading from ID to IC credential systems
• Industrial plant safety departments requiring access control at perimeter doors
• Distributors supplying readers for large-scale commercial building projects

Key Features

• Dual frequency support: 125KHz and 13.56MHz in one unit, covering ID, HID, and IC card formats
• Wiegand 26-34 output: Compatible with most standard access control panels and controllers
• Fast read speed: 0.2 seconds per card read, suitable for high-traffic entry points
• 7cm read range: Reliable proximity detection at typical door reader distance
• Customizable frequency configuration: Supports 125KHz/13.56MHz/ID+HID/IC+ID+HID combinations based on project requirements
• Wide operating temperature: -20°C to +70°C (-4°F to +140°F), suitable for indoor and covered outdoor installations
• Low power consumption: 70mAh at DC12V, compatible with standard access control power supplies
• Compact form factor: 120 x 50 x 20mm, fits standard single-gang mounting boxes
• Humidity tolerance: 10% to 90% operating humidity range

Technical Specifications

Industrial Applications

This dual frequency reader supports commercial and industrial access control projects where credential compatibility and system integration are critical procurement factors.

• Office building access control: Deploy across lobby doors, floor entrances, and parking gates where both ID and IC cards are in use by different tenant groups.
• Industrial facility perimeter control: Install at manufacturing plant entry points where worker credential formats may vary between departments or shifts.
• Warehouse and logistics centers: Use at dock doors and employee entrances where system integrators require a common reader model for both legacy and upgraded badge systems.
• Multi-site commercial complexes: Standardize on one reader across all buildings, reducing the number of SKUs a distributor or facility manager must stock and support.
• Government and institutional facilities: Deploy in phased credential upgrades where ID cards are being replaced with IC cards over time, avoiding double-reader installations.
• Parking access systems: Integrate with parking management controllers where both resident ID cards and visitor IC cards need to be read at entry and exit lanes.

OEM / ODM Manufacturing Support

As a manufacturer with over 20 years of production experience in RFID readers and access control products, do rfid reader manufacturer supports OEM and ODM customization for this dual frequency reader. Project contractors and system integrators requiring specific frequency combinations, custom output formats, or enclosure modifications can submit their requirements for evaluation.

Customization options include:

• Frequency configuration (125KHz / 13.56MHz / ID+HID / IC+ID+HID combinations)
• Wiegand output format (26-bit, 34-bit, or other standard formats)
• Enclosure color and material options beyond standard black
• Cable length and connector type modifications
• Custom logo and branding application on the reader housing
• Packaging design for distributor and wholesale distribution channels

Distributors and wholesalers seeking long-term supply relationships benefit from stable production capacity and batch consistency across orders. Each production batch undergoes quality inspection before packing, ensuring that readers delivered in different order cycles maintain the same read performance and output characteristics.

Factory Production Advantages

do rfid reader manufacturer operates as a dedicated RFID production facility with two decades of manufacturing experience in card readers, access control components, and RFID peripheral equipment. This production background translates into practical value for wholesale buyers and project-based procurement teams.

• Stable production capacity: The factory maintains consistent output to support bulk orders, repeat stocking orders, and long-term supply agreements without interruption.
• Quality inspection process: Every reader is tested before packing to verify read range, frequency response, output signal integrity, and power consumption within specified parameters.
• Batch consistency: Readers produced across different production runs maintain the same electrical characteristics and mechanical fit, important for projects where units will be installed at different phases.
• Export experience: The factory supports international shipping with documentation including CO, FTA, Form F, and Form E to assist with customs clearance at destination ports.
• Lead time management: Sample orders ship within 3 to 5 days. Bulk production orders ship within 7 to 30 days depending on quantity and customization requirements.

For distributors and system integrators evaluating suppliers, the factory’s ability to maintain stable output across order cycles reduces the risk of project delays caused by supply gaps. Wholesalers stocking this reader benefit from consistent product specifications and packaging, making inventory management and resale predictable.

Bulk Supply & Project Deployment Support

This dual frequency reader is suitable for wholesale procurement and large-scale project deployment. Bulk ordering reduces per-unit cost for system integrators and distributors managing multi-site installations.

Packaging details:

• Single unit packaging: One reader per box
• Carton packaging: 100 units per carton for bulk shipments
• Shipping ports: Shenzhen or Hong Kong
• Trade terms available: EXW, FOB, CIF, CFR
• Shipping methods: Express (DHL, FedEx, TNT, UPS), air freight, or sea freight

Project deployment benefits include:

• Compatibility with existing Wiegand-based access control panels eliminates the need for controller upgrades during reader replacement projects.
• Standard form factor fits common mounting boxes, reducing installation labor time for contractors deploying large numbers of readers.
• Low power consumption (70mAh at DC12V) allows multiple readers to share a single power supply, reducing wiring and power distribution costs in multi-door installations.
• Wide temperature range (-20°C to +70°C) supports installations in unconditioned spaces such as covered loading docks, parking structures, and industrial corridors.

Frequently Asked Questions

Q: How do I place a bulk order for this dual frequency reader?
A: Submit your order requirements through the inquiry form. Include the quantity, desired frequency configuration, and any customization needs. The sales team will confirm lead time and pricing based on the order specifications.

Q: Is the read range sufficient for typical access control installations?
A: The 7cm read range is designed for proximity card reading at standard door reader distance. This range is suitable for walk-through access points, lobby entrances, and office door installations. For applications requiring longer read range, contact the factory to discuss alternative reader options.

Q: Can this reader be customized for specific Wiegand output formats?
A: Yes. The factory supports Wiegand 26 and 34 output as standard. Other Wiegand formats can be discussed as part of OEM customization for volume orders.

Q: What is the typical lead time for a bulk order of 500 units?
A: For standard configuration readers, bulk orders typically ship within 7 to 15 days after order confirmation. Customized frequency combinations or enclosure modifications may require 15 to 30 days depending on the scope of changes.

Q: Do I need separate readers for ID cardholders and IC cardholders?
A: No. This dual frequency reader reads both 125KHz ID cards and 13.56MHz IC cards through one unit. This feature allows facilities with mixed credential types to use a single reader model across all access points.

Q: What documentation is provided for international shipping and customs clearance?
A: The factory can provide commercial invoices, packing lists, and certificates of origin (CO, FTA, Form F, Form E) as required by the destination country’s customs regulations.

For technical specifications, pricing, and OEM customization inquiries, contact do rfid reader manufacturer at info@dorfidreader.com. System integrators, distributors, and project contractors are welcome to request samples for evaluation before volume procurement.