Product Overview
The dual frequency RFID reader operating at 125KHz and 13.56MHz is a commercial-grade access control and identification terminal designed for system integrators, security contractors, and facility managers who require compatibility across multiple card technologies within a single deployment. This reader supports ID, HID, and IC card formats, making it suitable for mixed-technology environments where legacy and modern credentials must coexist on the same network. Unlike single-frequency alternatives, this unit eliminates the need for separate reader hardware when upgrading or expanding an existing access system.
Procurement teams and wholesale distributors choose this dual frequency format because it reduces inventory complexity, lowers per-site hardware cost, and simplifies field installation. By supporting both low-frequency proximity cards and high-frequency contactless smart cards from a single unit, project managers can standardize on one reader model across multi-building deployments, reducing training, spare parts stock, and maintenance overhead.
Product Advantages for Commercial and Industrial Deployment
- Mixed-Technology Compatibility – Supports 125KHz ID/HID and 13.56MHz IC cards within a single reader, eliminating the need for two separate devices at each access point.
- IP66 Environmental Protection – Sealed housing rated against dust ingress and water jets, suitable for outdoor gate, parking entry, warehouse dock, and perimeter access installations where exposure to weather is routine.
- Standard Wiegand Output (26–34 Bit) – Directly compatible with most commercial access control panels, controllers, and third-party security systems without requiring protocol converters or middleware.
- Low Power Consumption – Operating at DC 12V with a working current of 70mAh, this reader integrates easily into existing power distribution setups without requiring additional power supplies or line upgrades.
- Wide Operating Range – Rated for continuous operation between -20°C and +70°C with 10% to 90% humidity, suitable for both cold storage facilities and sun-exposed entry points in hot climates.
- Fast Read Speed – Card reading completes within 0.2 seconds per transaction, supporting smooth pedestrian flow during peak entry periods at commercial buildings, industrial sites, and institutional facilities.
Key Features
- Dual-frequency operation: 125KHz (ID/HID) and 13.56MHz (IC)
- Wiegand output: 26-bit to 34-bit configurable
- Read range: 7 cm (typical under standard conditions)
- Housing dimensions: L122 × W50 × H21 mm
- Housing color: Black (standard)
- Power supply: DC 12V
- Working current: 70mAh
- Card reading speed: 0.2 seconds per card
- Ingress protection: IP66
- Operating temperature: -20°C to +70°C
- Operating humidity: 10% to 90% non-condensing
- Custom logo available via screen print or UV printing on housing surface (no logo by default)
Technical Specifications
| Frequency Bands | 125KHz (ID/HID) and 13.56MHz (IC) |
| Supported Card Formats | ID, HID, IC (compatible with multiple credential types) |
| Output Interface | Wiegand 26-bit / 34-bit |
| Read Range | 7 cm (typical) |
| Card Read Speed | 0.2 seconds per card |
| Housing Dimensions | L122 × W50 × H21 mm |
| Housing Color | Black |
| Ingress Protection | IP66 |
| Operating Voltage | DC 12V |
| Working Current | 70mAh |
| Operating Temperature | -20°C to +70°C |
| Operating Humidity | 10% to 90% |
| Custom Logo | Available via screen print or UV printing (unit ships without logo by default) |
Industrial Applications
This dual frequency RFID reader is deployed across multiple commercial and industrial environments where mixed-credential access control is required. Common installation scenarios include:
- Perimeter Gates and Vehicle Entry Points – IP66-rated housing allows reliable outdoor operation at factory gates, parking lot entrances, and logistics yard access points where dust, rain, and temperature variation are present.
- Warehouse and Distribution Centers – Supports both employee ID badges and temporary contractor credentials, enabling flexible access control across large facilities with high personnel turnover.
- Office Buildings and Multi-Tenant Facilities – System integrators use this reader to unify access across floors and zones while supporting both legacy proximity cards and newer smart card credentials during phased upgrades.
- Industrial Manufacturing Sites – Reliable read performance at 7 cm range reduces misreads at high-traffic entry points, important for shift changes and delivery access.
- Institutional and Government Facilities – Dual-frequency support allows gradual migration from older ID/HID card systems to higher-security IC-based credentials without replacing all readers simultaneously.
- Parking Access and Toll Systems – Fast 0.2-second read speed supports vehicle entry without queue buildup, even during peak hours.
OEM / ODM Manufacturing Support
As a dedicated RFID reader manufacturer, do rfid reader manufacturer offers OEM and ODM customization for this dual frequency model. Commercial buyers, system integrators, and access control brands can request modifications including:
- Custom Logo Printing – Housing can be marked with company branding using screen print or UV printing. Units are supplied without logo by default, allowing branding flexibility for distributors and resellers.
- Wiegand Output Configuration – 26-bit or 34-bit output can be pre-configured at the factory to match the specific access control panel or controller being used in the project.
- Color Customization – While standard color is black, bulk orders can request alternative housing colors for brand differentiation or site-specific visual requirements.
- Cable and Connector Options – Lead length, connector type, and wiring configuration can be adjusted to match existing infrastructure or simplify field installation.
- Packaging and Labeling – Custom packaging, barcode labeling, and product documentation can be prepared for wholesale distribution, reducing repackaging effort on the buyer side.
OEM and ODM buyers benefit from factory-direct pricing, batch consistency across production runs, and technical support during project integration. The manufacturing process allows customization without extending standard lead times when order quantities are confirmed in advance.
Factory Production Advantages
do rfid reader manufacturer operates a dedicated production line for RFID access control readers with over 20 years of manufacturing experience. This production capability translates into several practical advantages for bulk buyers and project-based procurement:
- Stable Production Capacity – Factory output supports both small sample orders and large-scale deployment batches without supply interruption. Bulk orders for 5,000 to 100,000 units follow consistent production scheduling with confirmed delivery dates.
- Batch Consistency – Each production run uses the same component sourcing, assembly methods, and quality inspection criteria. System integrators and distributors receive units with uniform read range, output behavior, and housing finish across multiple orders.
- Fast Lead Time – Sample orders ship within 3 to 7 days after confirmation. Bulk orders typically ship within 7 to 30 days depending on quantity and customization requirements. This supports time-sensitive project schedules without requiring air freight.
- Quality Inspection In-House – Every unit undergoes functional testing before packing. Wiegand output, read range, frequency response, and power consumption are verified per batch. Units that fail inspection are rejected before shipment, reducing field failure rates for buyers.
- Export Experience – The factory has handled international shipping for more than two decades, including documentation for customs clearance such as Certificate of Origin (CO), FTA, Form F, and Form E. Buyers worldwide can rely on proper export paperwork and shipping coordination.
- Multiple Shipping Options – EXW, FOB, FCT, CIF, and CFR trade terms are available. The factory coordinates with DHL, FedEx, TNT, UPS, EMS, sea freight, and air freight carriers based on the buyer’s preferred logistics method.
Bulk Supply and Project Deployment Support
Wholesale buyers, distributors, and project contractors benefit from factory-direct supply arrangements that support large-scale deployments. Key commercial advantages include:
- Bulk Pricing Tiers – Volume-based pricing for orders of 500, 1,000, 5,000, and 10,000 units. Larger commitments receive corresponding price breaks, reducing per-unit cost for multi-site projects.
- Long-Term Supply Agreements – For ongoing projects or recurring product demand, the factory supports scheduled releases against a master order, allowing distributors to maintain inventory without overcommitting storage space.
- System Compatibility Assurance – The Wiegand 26–34 output format ensures compatibility with widely used access control panels from leading manufacturers, reducing integration risk for system integrators and security contractors.
- Technical Support During Deployment – The factory provides configuration guidance, wiring documentation, and troubleshooting support to ensure smooth installation across diverse site conditions.
- Sample Validation Before Bulk Order – Buyers can request sample units with their preferred customization (logo, Wiegand format, cable option) for field testing and system validation before committing to full production quantities.
FAQ
Q: What card types does this dual frequency reader support?
A: It supports 125KHz ID/HID cards and 13.56MHz IC smart cards, allowing mixed-credential access control within a single device.
Q: Can this reader be used outdoors?
A: Yes. The IP66-rated housing protects against dust and water jets, making it suitable for outdoor gate, parking, and perimeter access installations.
Q: What output does this reader provide?
A: It uses standard Wiegand output configurable for 26-bit or 34-bit, compatible with most commercial access control panels and security controllers.
Q: Can I get a sample before placing a bulk order?
A: Yes. Sample units are available for evaluation. The freight cost is covered by the buyer. Customization on samples can be coordinated with the factory.
Q: Is custom logo printing available on the housing?
A: Yes. Logo can be applied via screen print or UV printing. Default units ship without logo, allowing branding customization for distributors and resellers.
Q: What is the typical lead time for bulk orders?
A: Sample orders ship within 3 to 7 days after confirmation. Bulk orders typically ship within 7 to 30 days depending on quantity and customization requirements.
Q: What payment terms are available?
A: Payment via T/T, Western Union, and PayPal are accepted. Trade Assurance orders can also be supported.
Q: What warranty applies to this product?
A: The reader carries a 2-year warranty against manufacturing defects. Damage caused by improper handling, incorrect wiring, or environmental stress beyond rated specifications is not covered.
Q: Can the output format be customized for my existing system?
A: Yes. Wiegand 26-bit or 34-bit output can be pre-configured at the factory based on your controller requirements.
Q: How is the product packaged for bulk orders?
A: Each piece is packed individually in a box. Cartons hold 100 pieces per master carton for efficient handling and shipping.
For OEM customization requests, bulk pricing, or project-specific configuration support, contact do rfid reader manufacturer at info@dorfidreader.com.